Fenton氧化在废水处理中的应用

综述了近年来Fenton氧化在废水处理领域的应用状况,对Fenton试剂氧化的机理和主要影响因素:温度、pH、反应时间、H2O2和Fe2+的投加量、H2O2/Fe2+量比以及反应动力学模型进行了简要介绍.最后探讨了Fenton氧化技术在废水处理领域现存不足之处及今后的发展趋势.     

Electro-Fenton法的影响因素及研究进展

Electro-Fenton法是一种新型的电催化氧化技术,具有"环境友好"的特点,是一种高级氧化技术(AOPs)。结合国内外Electro-Fenton法的研究近况,阐述Fenton法的作用机理及主要影响因素,主要受pH值、O2流量、温度、电流密度、Fe2+离子浓度、电极间距离、电解质及电极材料等因素影响,结合具体的废水对主要反应参数进行总结,分析作用机理。对Electro-Fenton法的研究发展趋势提出了一些观点。     

Fenton氧化去除制药企业活性污泥中AOX的效果研究

用Fenton氧化处理合成制药企业活性污泥混合液,考察了不同Fe~(2+)、H_2O_2投加量和不同反应时间下污泥与上清液中AOX(可吸附有机卤代物)的去除效果,优化了反应条件,探讨了氧化机制.结果表明,Fenton氧化的最佳条件为H_2O_2投加量0.90 mol·L~(-1),Fe~(2+)投加量0.045 mol·L~(-1)[物质的量比为:n(Fe~(2+))∶n(H_2O_2)=1∶20],反应2 h,污泥和上清液中AOX可分别去除70.7%和78.5%.GC-MS分析结果显示,污泥中含有11种有机卤代物,Fenton氧化后有8种不再检出;3种仍有检出,但浓度有所降低,去除率约为40%~50%.与此同时,污泥中对二甲苯、邻苯二甲酸二异丁酯等非有机卤代物类有毒有害有机物也得到有效去除.     

Ce3+与Cu2+协同强化芬顿体系氧化苯酚的效能与机制研究

研究了Ce~(3+)与Cu~(2+)协同强化芬顿体系在不同初始条件下对水中苯酚的氧化效能与机制.结果表明,在p H适用范围的宽度和H_2O_2浓度变化方面,Ce~(3+)/Cu~(2+)/Fe~(2+)/H_2O_2体系比传统的芬顿体系更具有优势,该体系在p H=5.0、H_2O_2浓度为2.0mmol·L-1的条件下,仍可以对苯酚保持相对较高的氧化效能;Cu~(2+)可能会借助反应过程中的中间产物(醌类物质)生成Cu+,Cu+催化H_2O_2分解生成·OH,Ce~(3+)可能促进体系内醌类物质的形成,加快Fe~(3+)与Fe~(2+)的循环效能,在一定程度上提高了芬顿体系中H_2O_2分解生成·OH的速率,说明Cu~(2+)与Ce~(3+)对芬顿体系的强化作用具有协同性;自由基终止剂依然可以抑制Ce~(3+)、Cu~(2+)强化的芬顿体系对苯酚的降解,由此说明体系中起到氧化作用的活性物种仍然是羟基自由基(·OH).     

赤泥协同Fenton法处理焦化废水的研究

采用赤泥吸附协同Fenton法处理焦化废水,两者协同处理对COD的去除率高于其单独处理之和.考察了赤泥投加量、初始pH值、反应温度、H2O2浓度和Fe2+浓度等因素对降解效果的影响,实验结果表明,在20 g/L的赤泥、初始pH=3、80 mmol/L的H2O2、224 mg/L的Fe2+的最佳条件下,经过120 min...     

溴酸钾对二茂铁(Fc)非均相Fenton效能的影响

研究了KBrO3对二茂铁(Fc)非均相Fenton效能的影响,深入考察了KBrO3对体系中Fc溶解、H2O2分解和羟基自由基(·OH)生成的影响。结果表明,KBrO3的加入对不同反应阶段Fc/Fenton体系的效能均有明显的促进作用,初始阶段主要是由于KBrO3对·OH产生的促进作用所致,后期主要是由于KBrO3促进了体系中Fc的溶解,使得体系中溶解态的Fc催化的均相Fenton反应的比例增加,体系中H2O2的分解加快,·OH的表观生成率增加,进而促进了反应的进行。无KBrO3添加,pH=4,MB初始浓度为10 mg/L,Fc的量为1.6×10-3mol/L,[H2O2]/[MB]=3.14时,45 min时,MB的剩余率为9.1%,105 min时为0。当KBrO3的用量为3×10-4mol/L时,反应45 min后MB的去除率即可达到100%。随着KBrO3浓度的增加,其对Fc/Fenton效能的促进作用增强。     

Multi-response optimization of Fenton process for applicability assessment in landfill leachate treatment

Fenton process, as a pretreatment method, was found to be effective in the primary treatment of mature/medium landfill leachate. However, the main problem of the process is the large amount of produced sludge that requires an accurate feasibility evaluation for operational applications. In this study, the response surface methodology was applied for the modeling and optimization of Fenton process in three target responses, (1) overall COD removal, (2) sludge to iron ratio (SIR) and (3) organics removal to sludge ratio (ORSR), where the latter two were new self-defined responses for prediction of sludge generation and applicability assessment of the process, respectively. The effective variables included the initial pH, [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage. According to the statistical analysis, all the proposed models were adequate (with adjusted R² of 0.9116–0.9512) and had considerable predictive capability (with prediction R² up to 0.9092 and appropriate adequate precision). It was found that all the variables had significant effects on the responses, specifically by their observed role in dominant oxidation mechanism. The optimum operational conditions obtained by overlay plot, were found to be initial pH of 5.7, [H₂O₂]/[Fe²⁺] ratio of 17.72 and [Fe²⁺] of 195 mM, which led to 69% COD removal, 2.4 (l sludge/consumed mole Fe²⁺) of SIR and 16.5 (gCOD removed/l produced sludge) for ORSR in verification test, in accordance with models-predicted values. Finally, it was observed that [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage had significant influence on COD removal, while Fe²⁺ dosage and [H₂O₂]/[Fe²⁺] ratio had remarkable effects on SIR and ORSR responses, respectively.     

混凝与Fenton联用处理垃圾渗滤液的效能及成本

为对混凝/Fenton工艺与Fenton/混凝工艺处理垃圾渗滤液的效果和成本进行比较,分别对年轻渗滤液和老龄渗滤液原液按照混凝/Fenton工艺与Fenton/混凝工艺2种技术路线进行处理。实验结果表明,Fenton试剂对年轻垃圾渗滤液和老龄垃圾渗滤液COD去除率最高的反应条件为pH=3.5、H2O2和Fe2+的摩尔比为6、H2O2和渗滤液原液的COD质量比为3、反应时间4 h;在PAC与渗滤液原液的COD质量比为0.6时,PAC混凝对渗滤液原液的COD去除率最高。在对渗滤液COD去除率最高的Fenton反应和PAC混凝反应条件下,混凝/Fenton工艺对年轻渗滤液和老龄渗滤液的COD去除率分别为90.56%和86.56%;Fenton/混凝工艺对年轻渗滤液和老龄渗滤液的COD去除率分别为89.99%和85.99%,2种技术路线对渗滤液COD的去除率相差不大,但先PAC混凝后Fenton氧化工艺比先Fenton后混凝工艺每t节省62.6元,是更优化的渗滤液处理工艺。     

Comparison of Fenton and Photo-Fenton Processes for Livestock Wastewater Treatment

In this study, the photochemical degradation of livestock wastewater was carried out by the Fenton and Photo-Fenton processes. The effects of pH, reaction time, the molar ratio of Fe^{2 +}/H₂O₂, and the Fe^{2 +} dose were studied. The optimal conditions for the Fenton and Photo-Fenton processes were found to be at a pH of 4 and 5, an Fe^{2 +} dose of 0.066 M and 0.01 M, a concentration of hydrogen peroxide of 0.2 M and 0.1 M, and a molar ratio (Fe^{2 +}/H₂O₂) of 0.33 and 0.1, respectively. The optimal reaction times in the Fenton and Photo-Fenton processes were 60 min and 80 min, respectively. Under the optimal conditions of the Fenton and Photo-Fenton processes, the chemical oxygen demand (COD), color, and fecal coliform removal efficiencies were approximately 70–79, 70–85 and 96.0–99.4%, respectively.     

零价铁类Fenton试剂氧化降解废水中有机污染物的研究进展

综述了近年来国内外Fe0类Fenton试剂氧化反应降解废水中有机污染物的研究现状，介绍了Fe0-H2O2体系、紫外光-Fe0-H2O2体系和可见光-Fe0-H2O2体系处理有机污染物的机理、特点和效果，并对未来Fe0类Fenton试剂氧化反应体系处理有机污染物的发展前景进行了展望。